Whether the system in your home can be repaired or needs to come out entirely is the question we hear most often, and it deserves a straight answer before any work is authorized. The diagnosis comes first, every time. What the technician finds, how much useful life the equipment has left, and what a repair costs relative to a replacement are all part of that conversation. Homeowners and property managers in Severance get the same process: scope the job on the phone, explain the visit, confirm the rate before anything is scheduled.
We cover Severance and the surrounding area for the full range of residential and commercial heating and cooling work. Furnace repair, heat pump installation, ductwork, thermostats, indoor air quality, seasonal maintenance, and emergency calls when a system goes down at the worst time. If you want to see the complete service list, the services page covers it.
If you want to talk through what your system is doing, call (307) 263-6659. We are available every day from 8:30 AM to 11:00 PM.
Not every HVAC problem announces itself the same way. Some are sudden, some build slowly, and some look like one thing and turn out to be another. The situations below are the ones that come through most often for homes and small commercial properties in a town this size.
Older homes in this part of Weld County sometimes run hot-water baseboard or radiant systems rather than forced air. When a zone stops heating, pressure drops unexpectedly, or the boiler cycles on a fault code, the service visit covers the heat exchanger, circulator pump, expansion tank, zone valves, and controls. Hydronic systems require a different diagnostic approach than a furnace, and the repair scope is confirmed before any work is authorized.
A furnace or air conditioner that starts, runs briefly, and shuts off before the space reaches temperature is not a minor inconvenience. Short cycling stresses the equipment and usually points to a specific fault: restricted airflow, an overheating heat exchanger, a pressure switch out of spec, or a refrigerant charge problem. The technician works through the sequence of operation to find the cause rather than replacing the part that fails most often and hoping it holds.
Small commercial properties sometimes run packaged rooftop units rather than split systems, and a rooftop unit that fails takes the whole space with it. The service visit covers the same diagnostic ground as a residential call: refrigerant charge, heat exchanger condition, blower and air handler function, and controls. If the unit is beyond repair, replacement is scoped and quoted before anything is pulled.
A forced-air system that is producing the right temperature at the air handler but not delivering it evenly through the property usually has a duct problem. Leaking joints, disconnected sections, and undersized runs all reduce what reaches the rooms farthest from the unit. Duct sealing and repair address the distribution side of the system, and airflow is balanced rather than left to chance once the work is done.
A furnace that will not light, or that lights and then shuts down immediately, often comes down to the ignition system or a contaminated flame sensor. These are specific, diagnosable faults, and the repair visit covers both. A flame sensor that reads no flame even when combustion is happening will lock the furnace out as a safety measure, which is the right response from the equipment and the right signal to call.
Maintenance is worth scheduling before the equipment is under load, not after it has already struggled through the first cold week. A fall furnace tune-up covers the heat exchanger, ignition system, gas valve operation, burner condition, blower motor, and filter. Those are not box-checking items. A cracked heat exchanger found in October costs less to address than one found in January when every technician in the region is booked.
A spring AC or heat pump tune-up covers refrigerant charge, evaporator coil condition, electrical connections, and the air handler and blower. For heat pumps running year-round, an inspection before the heating season matters as much as the cooling-side check. The goal in both cases is catching a developing fault before it becomes an emergency, not confirming that everything is fine.
Scheduling is straightforward.
Call (307) 263-6659, describe the equipment and when it was last serviced, and the rate and scope are confirmed on the phone before anything is booked.
An efficiency rating on a furnace or heat pump is a laboratory figure. What a property actually sees depends on equipment sizing, duct condition, insulation, and how well the installation was carried out. A high-efficiency furnace installed in an undersized duct system, or a heat pump matched to the wrong load, will underperform regardless of what the specification sheet says.
This matters especially for cold-climate heat pump installations, which are a fast-growing upgrade in this region. Modern cold-climate heat pumps are rated to extract usable heat at temperatures well below zero, and incentive programs have made them a practical option where they were not before. But the efficiency gains only follow when the equipment is sized correctly for the space and installed so the controls and the existing system work together. That sizing and compatibility conversation happens before any equipment is ordered.
Indoor air quality and air filtration upgrades follow the same logic. A whole-home filtration system or a whole-home humidifier that is matched to the air handler and installed correctly treats every cubic foot of air the system moves. One that is mismatched or poorly integrated does not. The visit covers the installation and the setup, not just the hardware.
No jargon on the phone unless you ask for it. When you call about a system that is not heating or not cooling, the person who picks up asks what the equipment is doing, works through the situation with you, and explains what a diagnostic visit involves before anything is scheduled. That is true for a routine repair call and it is equally true for an emergency.
We take urgent calls for systems that are completely down, and we are available every day from 8:30 AM to 11:00 PM. A furnace that stops working on a cold night in this region is not a problem to wait on.
Call (307) 263-6659 and we will get someone out as quickly as the schedule allows.
For rental properties and small commercial spaces that need to stay occupied or operational, the scope of the visit and what the tenant or staff needs to know beforehand are part of the conversation when you book. A property manager with multiple units gets the same process as a homeowner, and the diagnosis is explained before any repair is authorized.
The rate for a service or diagnostic visit is given on the phone before the appointment is confirmed. What the technician finds during the visit determines the repair cost, and that cost is explained to you before any work is authorized. You are not approving a repair you did not ask for.
What moves a quote is what the fault turns out to be, what has to be reached to fix it, and whether a repair or a replacement is the better answer given the age and condition of the equipment. A straightforward igniter replacement is a different conversation than a heat exchanger that has cracked. If the scope changes based on what the inspection uncovers, the updated cost is discussed before anything additional is done.
To get a quote, call (307) 263-6659.
Describe the equipment, what it is doing, and when the problem started. That is enough to scope the visit and give you a rate on the phone.
We serve Severance and the surrounding communities across Weld County. Windsor, Timnath, Greeley, Eaton, and Ault are all within our service area, and we take calls from properties throughout the region. If you are outside those towns but nearby, call and we will confirm whether your address is covered before anything is scheduled.
Residential and commercial properties are both welcome. Homeowners, landlords managing rental units, and property managers overseeing small commercial buildings all call us for the same work. The coverage area is the same regardless of property type.
We handle packaged rooftop units as part of our commercial heating and cooling work. The diagnostic process covers refrigerant charge, heat exchanger condition, blower and air handler function, and controls, the same ground as a residential call. If the unit needs replacement, the scope and price are confirmed before anything is pulled.
Call (307) 263-6659 to describe the equipment and we will confirm the service covers your situation.
When you call, the person who answers asks what the furnace is doing and scopes the situation on the phone. The rate for the diagnostic visit is confirmed before anything is scheduled. When the technician arrives, the visit works through the ignition system, heat exchanger, gas valve, pressure switches, and blower motor to find the root cause. The diagnosis is explained before any repair is authorized, and the repair cost is confirmed before work begins.
The technician clears the immediate work area before leaving. If the job involves cutting into ductwork or accessing a confined space, any debris from that work is removed. We do not leave materials, packaging, or old components behind. If you have a concern about a specific area of the property, mention it when you call to schedule.
A standard heat pump loses efficiency quickly as outdoor temperatures fall and may not provide adequate heat once temperatures drop well below freezing. Cold-climate heat pumps are designed to extract usable heat from outdoor air at much lower temperatures, which makes them a practical heating option in a region with long, hard winters rather than a compromise. Installation involves selecting equipment rated for the temperature range here, sizing it correctly for the home, and confirming it integrates with any existing heating equipment. The details are worked out before anything is ordered.
Yes. We take calls from property managers, building managers, and managing agents who are arranging service on behalf of an owner. When you call, let us know the access situation and who should receive the diagnosis and pricing confirmation before work is authorized.
Not automatically. The duct system is assessed as part of the installation process, and replacement is only recommended when the existing ductwork cannot support the new equipment or has damage that would undermine performance. If duct repair or replacement is needed, that is explained before any work is authorized.
Call (307) 263-6659 when you book and provide whatever directions or landmarks help identify the property.
If the address is unusual, a rural route, a unit without a posted number, or a commercial suite that is not clearly marked, that information is noted when the visit is scheduled so the technician knows what to look for.
A system that is completely down in this region is not a situation to manage overnight if it can be helped.
Call (307) 263-6659 and we will scope the job on the phone, confirm the rate, and get someone to the property as quickly as the schedule allows.
We are available every day from 8:30 AM to 11:00 PM. We handle the full range of heating and cooling work for Severance and the surrounding area.
Close by, we also take heating and cooling work in: Timnath, Eaton, Ault, Fort Collins, Wellington.
See the whole of our full list of communities.
Every heating and cooling job we handle starts the same way: a call, a conversation about what the system is doing, and a clear explanation of what the visit covers before anything is scheduled. The table below maps out the work we do, who each service fits best, and a practical note worth knowing before you call. If a service applies to your situation, reach out and we will confirm the rate and scope on the phone.
| Service Type | What It Covers | Common Needs | Good to Know |
|---|---|---|---|
| HVAC System Installation & Replacement | Load calculation and equipment sizingCentral AC, furnace, heat pump, or mini-split installationDuctwork compatibility assessmentFull system commissioning and cycle test | Homeowners, landlords, and commercial property managers replacing aging or failed equipment | Equipment that is not sized correctly for the space will underperform regardless of the brand on the label |
| Emergency HVAC Service | No-heat and no-cool calls are taken on short notice.Phone scope before the visitRate confirmed before dispatchDiagnosis explained on arrival | Any property where the heating or cooling system has gone down and waiting is not an option | We are available every day from 8:30 AM to 11:00 PM, emergency calls handled the same way as routine ones |
| Boiler & Hydronic Heating Service | Boiler pressure and temperature checkZone valve and circulator pump inspectionHeat exchanger and combustion assessmentHydronic distribution troubleshooting | Older commercial buildings and residential properties with hydronic or radiant space heating systems | Boiler issues often show up as uneven heat across zones rather than a complete system failure |
Call us at (307) 263-6659 and we will scope the job, explain what the visit covers, and give you a rate before anything is scheduled.
(307) 263-6659