When a rental sits between tenants, a property manager wants the HVAC system checked before the next lease begins. When a landlord gets a call about no heat in the middle of winter, the priority is getting someone out fast and keeping the tenant informed. Those calls come in from Ault regularly, and we handle them the same way we handle any service call: scope the job on the phone, confirm the rate, explain what the visit covers before it is scheduled.
We take calls from property managers, building owners, and homeowners across Ault and the surrounding area. No jargon on the phone unless you ask for it. Whether the question is about a furnace that stopped firing last night or a system that has not been serviced in years, the person who picks up knows the trade and can work through the situation with you. We are available every day from 8:30 AM to 11:00 PM.
Call (307) 263-6659 to get started.
We take short-notice work. If a furnace goes down or an air conditioner stops cooling, that call goes to the front of the line. Emergency calls are answered during our hours, every day from 8:30 AM to 11:00 PM, and the person who picks up will work through what is happening with the system before anything is dispatched.
For a rental or a commercial space that cannot simply close while work is being done, we talk through the timing on the call. A tenant who needs to be home, a business that needs the space open, a property that requires a key pickup: those logistics are worked out before the visit is booked, not discovered when the technician arrives. The scope of the visit is confirmed so there are no loose ends.
Appointments are arranged over the phone. The rate is given before anything is scheduled. If the situation is urgent, say so and we will work with what the schedule allows.
A price for a repair depends on what the diagnostic finds. A furnace that will not fire could need an igniter, a pressure switch, or a gas valve, and the cost moves with the part and the labor involved. A system that has been short-cycling may have a straightforward fix or may turn out to need more involved work. The visit is what tells us which it is.
Replacement quotes depend on equipment type, how the system is configured, and what the existing installation requires. A forced-air furnace swap in a straightforward installation lands differently than a heat pump installation that involves running a new refrigerant line set and verifying the existing ductwork can carry the load. Those details are worked through on the call and confirmed before anything is scheduled.
What you will not get is a number that changes after the technician arrives without an explanation. If the diagnostic turns up something the phone call could not have anticipated, the updated cost is explained before any additional work proceeds. The price for the diagnostic visit itself is given when you call.
The technician arrives, assesses what the system is doing, and works through the sequence of operation to find where it is failing. Fault codes on modern equipment are a starting point. The diagnostic goes further than that, checking the components most likely to be behind the reported symptom rather than replacing the first likely part and hoping it holds.
The diagnosis is explained before any repair is authorized. You hear what was found, what the options are, and what each one involves. That conversation happens before a wrench turns. After the repair, the system is run through a full cycle to confirm it is operating correctly before the technician leaves.
A furnace that will not light, a heat pump that is not producing heat, a boiler that has locked out on a fault code: these are the calls that come in most often in this region when temperatures drop. The technician works through the ignition system, heat exchanger, gas valve, and blower motor. If the heat exchanger has cracked, that is a replacement conversation, not a patch.
An air conditioner blowing warm air, an outdoor unit running but the house not cooling, a system that cycles on and off without reaching temperature: the diagnostic covers refrigerant charge, compressor and condenser function, and evaporator coil condition. The region's cooling season is shorter, but a system that is not working on a hot afternoon is not something to wait out.
Rooms that stay cold while the rest of the house is comfortable, a floor that never warms up properly, a space that the thermostat seems to have no grip on: these complaints usually come down to ductwork or airflow rather than the equipment itself.
Leaking ducts lose conditioned air before it reaches the room. A duct connection that has separated, a section of flex duct that has kinked, a register that was never sized for the run it serves: any of these can leave a room underserved while the equipment runs normally. Duct sealing and duct repair address the distribution side when that is where the problem is.
Older homes and additions are where this shows up most often. A house that was extended without the duct system being redesigned to match will have rooms the original layout never properly reached. The diagnostic visit covers both the equipment and the distribution, so the answer addresses the actual cause.
A repair makes sense when the equipment has useful life left and the cost of the fix is proportionate to what that life is worth. A furnace that needs an igniter after several years of reliable service is a reasonable repair. A furnace that has needed three repairs in two heating seasons, or one where the heat exchanger has cracked, is a different conversation.
The calculation is straightforward: if the repair cost approaches what a replacement would run over the same period, replacement is usually the better answer. We are honest about when a system still has life in it, and equally honest when it does not. A repair that buys six months is not a favor to the customer.
Age alone does not settle it. A well-maintained system that develops a single fault is not automatically a replacement candidate. What matters is the fault, the repair cost, the condition of the rest of the system, and what a replacement would involve. That conversation happens after the diagnostic, before any work is authorized. For the full list, go to the page listing our HVAC services.
A furnace that has not been serviced in several seasons is a common situation in a town where older homes still run on their original equipment. A maintenance visit covers the ignition system, heat exchanger, burner condition, blower motor, and filter. Catching a developing problem before the heating season starts costs less than addressing it after a breakdown in January.
A system that heats unevenly across a property often comes down to how airflow is distributed rather than anything wrong with the equipment itself. Register and vent rebalancing adjusts how the system delivers conditioned air across the building, addressing the rooms that are underserved without adding load to the equipment.
Boilers and radiant heating systems show up in older commercial buildings and some residential properties across Weld County. A boiler service visit covers the heat exchanger, circulator pump, expansion tank, zone valves, and controls. Uneven heat across zones, pressure loss, and fault lockouts are the symptoms that most often prompt the call.
A compressor that is drawing too much current, a condenser coil that is dirty or damaged, a fan motor that has failed: these are outdoor-unit faults that prevent the system from cooling or heating properly. The diagnostic covers the full outdoor unit, including refrigerant line connections, coil condition, and electrical function, before the indoor side is evaluated.
We serve Ault and the surrounding area across Weld County. Pierce, Eaton, Severance, Nunn, and Windsor are all covered.
If your property is in one of those towns or somewhere nearby, call (307) 263-6659 and we will confirm coverage before anything is scheduled.
We do not limit coverage by town. If the address is in the area we work, we take the call.
The air handler inspection covers the blower motor and wheel, the evaporator coil, the condensate drain, filter condition, and the electrical connections at the unit. On a furnace, the heat exchanger and burner assembly are also part of what gets checked. Both the indoor and outdoor units are evaluated as part of a complete service visit.
Yes. Property managers and landlords with multiple units often schedule service across several addresses. Call and let us know how many properties are involved and what each one needs, and we will work through the scheduling from there.
When you call, someone who knows the trade picks up and works through the situation with you on the phone. The rate for the diagnostic visit is confirmed before anything is scheduled, and the scope of the visit is explained so you know what the technician will cover. If the repair requires a part to be ordered, you are told that before the technician leaves, along with what the next step looks like.
It changes what the diagnostic visit covers, not how we approach it. Older equipment that has not been maintained is more likely to have accumulated faults, and the technician works through the full system rather than stopping at the first thing that looks wrong. If the condition of the equipment raises a repair-versus-replacement question, that conversation happens after the diagnostic and before any work is authorized.
Yes, for the duration of the installation. The scope and the expected timeframe for the work are confirmed before the visit is scheduled so you can plan accordingly. For a full replacement, that is usually a single day, though the specifics depend on the equipment and the condition of the existing installation.
A property that has run warm in one room and cold in another for years, a furnace that has been nursing along through a few seasons, a system that nobody has looked at since the last tenant moved out: these are not situations that improve on their own. We are available every day from 8:30 AM to 11:00 PM.
Plain questions. Honest diagnosis. Clear options.
Call (307) 263-6659 for a quote.
We take heating and cooling work in these nearby communities as well: Eaton, Severance, Timnath.
For every town we reach, see our full list of communities.
Every heating and cooling job we handle starts the same way: a call, a conversation about what the system is doing, and a clear explanation of what the visit covers before anything is scheduled. The table below maps out the work we do, who each service fits best, and a practical note worth knowing before you call. If a service applies to your situation, reach out and we will confirm the rate and scope on the phone.
| Service Type | What It Covers | Common Needs | Good to Know |
|---|---|---|---|
| Indoor Air Quality & Air Filtration | Whole-home air filtration installationAir purifier integration with existing HVACDuct system particulate assessmentFilter upgrade recommendations | Households concerned about dust, allergens, or air quality moving through the duct system | Whole-home systems work through the existing air handler rather than adding a standalone unit to each room |
| HVAC System Installation & Replacement | Load calculation and equipment sizingCentral AC, furnace, heat pump, or mini-split installationDuctwork compatibility assessmentFull system commissioning and cycle test | Homeowners, landlords, and commercial property managers replacing aging or failed equipment | Equipment that is not sized correctly for the space will underperform regardless of the brand on the label |
| Thermostat & Smart Control Installation | Existing wiring compatibility checkStandard and smart thermostat installationControl-to-equipment communication verificationSetup walkthrough before visit ends | Anyone dealing with erratic system behavior or wanting better control over heating and cooling schedules | Some smart thermostats require a common wire that older systems lack, and we assess that before the new unit is installed |
Call us at (307) 263-6659 and we will scope the job, explain what the visit covers, and give you a rate before anything is scheduled.
(307) 263-6659